|
EBOMAC Low voltage and Medium
voltage switchboards are type tested in international
independent testing laboratories and certified by
international certification bodies like "ASTA, KEMA &
ACAE" The switchboards designed and tested complying to
the latest international standards (IEC/BS) and local
regulations (MEW-S1). The switchboards also complies to
'Kuwait Oil Company (KOC)' & 'Kuwait National Petroleum
Company (KNPC)' specifications. Some of the key areas where
EBOMAC switchboards are installed for more than 2 decades are
Oil companies, refineries, commercial complex, industries,
residential areas, MEW substations, pumping stations,
treatment plants etc. EBOMAC also manufactures the products to
meet the site conditions and tailor-made to site
measurements.
Product Details
 |
Main Low Tension Board
(MLTB) :
Type PM200 switchboard is
economical, multi-cubicle and type tested assembly with
modular construction, floor mounted, free standing, rating
upto 6000A and withstand capacity upto 100 KA for 1 sec.
Product Brief... |
|
|
|
|
Low Voltage Main /
Sub-main switchboards (MSB / SMSB):
Type B.. series
switchboards are economical, box / cubical type, type
tested assembly, wall / floor mounted, rating upto 700
A and withstand capacity up to 40 KA for 1 sec.
Product Brief... |
 |
|
|
|
|
 |
Low Voltage
Distribution Boards (FDB) :
Ebomac Distribution
boards, suitable for final circuit applications,
are designed for industrial & domestic use. The
design is based on modular concept that provides
full flexibility. Enclosures are made with
specially designed dies, type flush or surface
mounted.
Product Brief...
|
| |
|
|
Low
Voltage Motor Control Center (MCC):
Type PM200 Motor
Control Center is economical, multi cubicle
and type tested assembly with modular
construction. Design is available in single
front and double front (back to back)
executions in both fully draw out & fixed
versions .
Product Brief...
|
 |
| |
|
| |
|
|
|
|
|
 |
Low Voltage Automatic
Transfer switches (ATS):
EBomac ATS with enclosed
type construction, available in wide range from 30A to
4000A. Electrically & mechanically interlocked ACB type
ATS available for ratings 600A & above. Contractor / MCCB
type ATS available for rating less than 600 A. Additional
Manual changeover switches-Isolation provides complete
isolation of ATS in case of maintenance & repair.
Product Brief...
|
| |
|
|
Medium Voltage
Switchboards :
Type SR / SRU
switchgears represent latest M.V. switching equipment
in industry, commercial and utility installations
involving transformers, feeder circuits, transmission
& distribution lines, motor controls. These
switchgears have been developed and tested in
accordance with the IEC standards 60298 & 60294 so as
to comply with the highest operation & safety
standards. Fully type tested assembly with
additionally tested for Arc fault at 26.5KA for 0.5
sec. are available for a voltage range 7.2 - 12 KV,
current rating 630A - 3150A & short time withstand
current values 16 - 26.3KA.
Product Brief...
|
 |
| |
|
 |
M.V. Automatic
Transfer switches:
Construction is
similar to that of the medium voltage switchgears.
Designed for use in the most critical applications
such as hospitals, airports, communication
facilities and fit the need for dependable
continuity of power where emergency or standby
applications exist.
|
| |
|
|
Cable
Installation Accessories:
With the latest
computer technology in sheet metal
fabrication, requirements such as conventional
cable trays or channel support system, the
latest designs in wire mesh tray or the heavy
duty cable ladder and under floor trunking,
Ebomac can provide the product to meet you
requirement. |
 |
|
|
|
|
|
|
|
|
